How To Fetch Water From A Well

How To Fetch Water From A Well

  1. Look for a very clean Fetcher so as to reduce the rate of disease contraction.
  2. Locate a very clean and easy-to-fetch well around you.
  3. Move to the well side, but make sure you’re not staggering(If You’re short, Don’t fetch water from wells)
  4. Take your balance.
  5. Slowly put your fetcher in the well, but make sure you don’t drop it in the well.
  6. Slowly bring out the fetched water.
  7. Pour the fetched water in to the bucket you carried along.
  8. Thats it. Close the well and start carrying your water to your destination.

A well is a water source which is usually obtained by continuous and severe digging of the ground surface to obtain water.
You can also watch a video below:


Well water can be used for different purposes which include; drinking, washing and other house hold chores.
The maintenance of a well water however depends on the proper maintenance of the well. Some of the ways to preserve a well is by using a neat fetcher. Avoid the spilling of dirty substances into water bodies.

To get water from a well, a fetcher is required. It is usually a rubber like material which has been designed in a way that it can get water from an underground POSITION. In place of this rubber-like material, some people use bucket.

A strong and firm rope is tied to the edge of the fetcher and it is allowed to go down into the well. Then take water, after some time it is pulled out and the water is emptied into a desired bucket or location.
The process is repeated until the bucket or drum is properly filled. Although the process of drawing out water from the well could be really stressful.

Be the first to comment

Leave a Reply

Your email address will not be published.